Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
+603-8061 4828
+603-8061 4833
Young Jou Machinery Sdn Bhd
Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
YJ-4508
| Previous | 2 / 8 | Next |
Auto. Tapping Machine- Pitch Lead Type
- Installed an isolated cooling fan in the interior of motor to dissipate heat.Could be operated continuously,steady and durable.
- The Vertical column is enlarged (60mm),vertical column is solid and treated by tempering to get rid of stress, ssurface is chrome plated, wear resisting and no rust.
- High speed rotation continuously,50 times/per Minute.
- Free to exchange tiny pitch.
- Quick and easy to exchange.
- Gear drives with merely one side teeth without slots.
- Slow revolving, wear resisting
- Because one running is for each tapping thread, it can taps perfect thread's rings to let the tap enlarge the using life time, the accuracy gets the standard of the gauge, the working piece cannot pull jumping while the tapping is backing action, it can simplify the fixture, the working pieces don't pressure or holding, they only avoid anti-rotation to tapping job.
EXAMPLE / TAPPING MACHINE EQUIPPED WITH THE MULTI-SPINDLE TAPPING HEAD & THE INDEXING DISK.
- The multi-working stations can stagger the mini-distance of the hose's position, then matches the multi-spindles to increase productive efficiency.
- It spends the low cost to get higher productive efficiency, so it doesn't need to special order of a proffessional machine.
- It can avoid the loss to make the trouble that the working piece didn't be tapped.
| Vertical type YJ-4508 (Weight about 120kg) | |||||||
| Main spindle max. stroke(mm) | Type of the front side of Main spindle(mm) | Diameter of thread(mm) | Up and Down moving distance of the head(mm) | Distance between the main spindle and the table(mm) | Working table size(mm) | ||
| 45 |
JT-2/CT12 ¹¥ÑÀͲŠA |
Ø2~Ø8 Less than (Ø10) |
260 | 350 |
225x230 |
||
| Motor | Main spindle speed (R.P.M.) | Auto feeding thread pitch for which suits machine | Max. capacity of Multi-spindle | Packing dimension(cm) | Gross Weight(kg) | ||
| 50HZ | 60HZ | Range of TPI | mm | ||||
|
3PH 4P 0.37KW (1/2HP) |
1340 760 420 |
1600 900 500 |
80 72 64 60 56 48 44 40 36 32 28 27 26 24 20 19 18 (16) |
0.4 0.45 0.5 0.6 0.7 0.75 0.8 0.9 1.0 1.2 1.25 (1.5) (1.75) |
Ø3x10 spindles Ø4x5 spindles Ø5x2 spindles |
75x54x96 (LxWxH) |
140 |
